Native Instruments MASCHINE MIKRO MK3 Manual page 704

If you have selected a Section within the current Loop Range via the Arrow buttons, the Loop
Range and the playback position stay untouched.
Selecting Sections and Section Banks on the Controller
Selecting a Section Bank
To select a Section located in another Section bank:
1. Press SHIFT + SCENE
2. Press and hold SCENE
3. Press SHIFT + Left/Right Arrow button to select the previous/next Section bank, respec-
tively.
If the last Section bank is selected and not empty, pressing
a new, empty Section bank, see section
info.
Selecting a Section
►
To select a Section in the current Section bank, press
sponding to this Section.
Upon your selection, the following happens:
▪ The Pattern Editor displays the Pattern for the focused Group in this Section. If there is no
Pattern for the focused Group in the Section you have just selected, the Pattern Editor is
empty.
▪ The Loop Range is set to the selected Section, see section Selecting a Loop Range.
▪ If playback is off the playhead immediately jumps to the beginning of the selected Section.
If playback is on the playhead jumps according to the Perform Grid settings, see section
Jumping to Other Scenes.
16.3.5 Reorganizing Sections
Reordering Sections is essential to organize your Sections and arrange your song.
In the software you can reorganize sections both in the Arranger and in the Section Manager.
to enter Song view.
to enter Scene mode (or pin it by pressing
±16.3.12, Creating and Deleting Section Banks
Working with the Arranger
SCENE + CONTROL).
SHIFT + Right Arrow button will create
SCENE + the dim lit pad corre-
MASCHINE MIKRO - Manual - 704
Using Song View
for more