Native Instruments MASCHINE MIKRO MK3 Manual page 385

Element
Decay
Tune Hold
Glide
Impact
Advanced Page
The Advanced page contains parameters controlling the individual oscillators.
Description
Adjusts the duration of the sound9s tail, measured as a percentage.
Available values range from 0.0 to 100.0 % (default: 50.0 %).
When Tune Hold is enabled, the tuning behavior is that of the
Fractal tom: the tuning is fixed until the next note is received (see
±9.5.1, Tom 3
Tronic). This allows you to create arpeggiated
patterns by adjusting the
is playing.
When Tune Hold is disabled (default), the tuning behavior is that of
the other modules: the tuning responds immediately when you
adjust the Tune parameter.
Adjusts the glide between the pitch of new notes, measured in
milliseconds. When the
pitch glides smoothly to the new tuning. The
defines the duration this glide takes. Available values range from
None (no glide, default) to 762.8 ms.
Adjusts the amount of attack, measured as a percentage. Available
values range from 0.0 % (soft attack) to 100.0 % (maximum
attack). The default value is 60.0 %.
Tune parameter while a sequence of notes
Glide parameter is set higher than zero, the
Glide
MASCHINE MIKRO - Manual - 385
Using the Drumsynths
The Percussions
parameter then