Native Instruments MASCHINE MIKRO MK3 Manual page 770

▪ Use the scroll wheel of your mouse to zoom in/out. You can also use the zooming scroll bar
(3).
▪ Play range markers (4) and loop markers (5): See below.
▪ Playhead indicator: When the Sample is played back (e.g., by pressing the pad or by click-
ing the little play icon in the information bar above the waveform), a playhead indicator
(white vertical line) shows you the current play position within the waveform.
▪ Context menu: Right-click (macOS: [Ctrl]-click) anywhere in the waveform to open a context
menu with the following commands:
Command
Open containing folder Opens the folder on your hard disk containing the Sample, providing
Save Sample As...
(2) Timeline
Shows the time scale in seconds.
(3) Zooming scroll bar
Click the main part of the scroll bar and drag your mouse horizontally to scroll through the
waveform on the horizontal axis (time), or drag it vertically to zoom in/out on this time axis.
You can also click the left or right handle of the scroll bar and drag it horizontally to zoom in/
out while keeping the opposite border of the display at a fix position in the waveform. Double-
click the main part of the bar to reset the zoom and display the entire waveform. Alternatively
you can use the scroll wheel of your mouse when hovering the waveform display (1) to zoom in/
out.
(4) Play range markers
The S and E markers indicate the start and end points of the play range, respectively. Drag
them with the mouse to modify the portion of the Sample that will be played back. This can
also be done in the PLAY RANGE
±17.5.6, Adjusting the Zone
(see section
(5) Loop markers
Description
quick access to the original file.
Opens a Save Sample As dialog allowing to save the Sample of the
focused Zone under another name and/or to another location on your
computer.
section of the Zone settings, under the waveform display
Settings).
Sampling and Sample Mapping
Mapping Samples to Zones
MASCHINE MIKRO - Manual - 770