Snare - Iron - Native Instruments MASCHINE MIKRO MK3 Manual

Element
SCALE Section
Velocity
9.3.8 Snare 3 Iron
The Iron snare is an acoustic snare drum model that is capable of a metallic, bright sound.
The two modes available on its
tics.
The parameters described below are presented as they appear in the Control area (Arrange view).
The same parameters are available in the Plug-in panel within the Plug-in Strip (Mix view). See
±13.4, The Plug-in Strip
Main Page
Element
MAIN Section
Engine
Tune
Description
Adjusts the velocity response of the drum. Available values range
from -100.0 % to 100.0 % (default value). At zero (mid course),
the drum is played at full velocity, no matter how hard you hit the
keys (or pads). From that mid position, by turning the knob to the
right you increase the positive velocity response and make the drum
more and more sensitive to the velocities at which you hit the keys/
pads. From the mid position, turning the knob to the left as the
inverse effect: the harder you hit the key/pad, the softer the
resulting drum sound will be.
Advanced page select from two different snare wire characteris-
for more information on this.
Description
Selects the engine used in the Snare Plug-in. If you change this
setting, please refer to
Adjusts the pitch of the drum played by the middle C, measured in
MIDI note numbers and cents. Available values range from 46.00 to
70.00. The default value is 58.00. For more details see
Pitch Range, Tuning, and MIDI
±9.3, The
Snares.
Notes.
MASCHINE MIKRO - Manual - 355
Using the Drumsynths
The Snares
±9.1.5,