Native Instruments MASCHINE MIKRO MK3 Manual page 750

Parameter
MONO
BPM (BPM Mode)
ADJUST
ENGINE Section
ZERO-X (Zero
Crossing, Detect mode
only)
17.4.3 Manually Adjusting Your Slices
In addition to the Detect, Split, Grid, and Manual modes that create Slices automatically (see
±17.4.2, Adjusting the Slicing Settings
section
ing your mouse, the waveform display, and the various edit tools at your disposal.
Description
The Sample Slicer Mono option when activated automatically sets
the Voice and Choke Group of all sample slices to 1 when slicing to a
Group.
This time saving feature is useful when you don9t want to have lots of
samples triggered or repeating at the same time, for example, when
you slice a drum loop and trigger the individual hits to form a new
pattern. When Mono is selected and the slices are applied to a
Group, the sampler polyphony is automatically set to 1 so only one
voice will play at a time. The Choke Group is also automatically set to
1 so each new pad that is hit will always take priority over the
previous one by cancelling it out. This behavior can be found on
vintage drum machines (typically used to <choke= the open hi-hat
with the closed one), but also in monophonic synthesizers that are
only capable of playing one note at a time.
Selects how the tempo is defined: If you select Auto, MASCHINE will
calculate the tempo automatically. If you select Manual, you can
enter the tempo in BPM manually.
If BPM is set to Auto, you can choose between the tempo that
MASCHINE detected, or half or double of that tempo. If
to Manual, you can adjust the tempo manually.
(Detect mode only)
When MODE is set to Detect, activate
Slices to be created on the closest locations where the audio signal
crosses the zero value. This can be helpful to avoid clicks when
playing back Slices in another sequence.
above), you can also adjust Slices manually us-
Sampling and Sample Mapping
BPM
ZERO-X to force the detected
MASCHINE MIKRO - Manual - 750
Slicing a Sample
is set