Native Instruments MASCHINE MIKRO MK3 Manual page 664

Main Page
Parameter
MODE
Mode
TOUCHSTRIP
Engage
Length
TS Assign
STUTTER
Gate
Pitch
LOOP
Direction
Description
Select an effect.
Controls a hard bypass. Activating the control commences
looping, releasing the control bypasses the effect.
Can be assigned to Length
(relative pitch) using TS
Assigns the control to Length
Applies a volume envelope to the loop, exaggerating the
"stutter" effect, especially at short loop lengths. Setting the
parameter to 100% effectively disables the envelope whereas
the gating is most extreme at 0%.
Parameter controls playback pitch (relative to pitch when the
effect is engaged) when the controls are assigned to Length,
and the Length parameter controls loop length when the
control is assigned to Pitch. Otherwise each of these
parameters has no effect and is respectively hidden.
Controls the looping direction4Forward
Reverse (always reverse) or Both. In
forwards by default on engage and whenever the most recent
control movement was upwards, or reverse whenever the most
recent control movement was downwards. The Direction
parameter is available only when the
Length.
(loop length, by default) or
Assign.
or Pitch.
(always forward),
Both mode, direction is
TS Assign is set to
MASCHINE MIKRO - Manual - 664
Effect Reference
Perform FX
Pitch