Assigning Macro Controls Using The Software - Native Instruments MASCHINE MIKRO MK3 Manual

A Macro Control of a channel can control any parameter located in the properties or Plug-ins of that
channel or of any underlying channel. In other words:
▪ For Sounds: You can assign the Macro Controls of a Sound to any parameters in its proper-
ties or Plug-ins. It is also possible to assign MIDI Control Change messages, Pitchbend and
Program Changes to Macro Controls in order to control external MIDI devices.
▪ For Groups: You can assign the Macro Controls of a Group to any parameters in its proper-
ties or Plug-ins as well as any parameters in any Sound inside the Group.
▪ For the Master: You can assign the Macro Controls to any parameters found in the proper-
ties or Plug-ins of any channel in your Project.
Obviously, the Macro properties (even of a different channel) are not available as targets for any
Macro Control.
Linking the same parameter to more than one Macro Control can be useful in the following example:
If a parameter of a Sound is particularly important, you can link it to the same knob in the Macro
Controls of that Sound, of its parent Group, and of the Master. By doing this, you ensure that the
parameter is always available on the same knob when you switch between the Master, Group, and
Sound level (but not if you switch to another Sound or Group, of course).
Macro Control Shortcut on the Controller
On your controller, a dedicated button allows you to quickly access your Macro Controls at any
time:
Press SHIFT + PLUG-IN
nel (Sound, Group or Master).
12.3.2

Assigning Macro Controls Using the Software

Macro Controls can be assigned in two different ways. The quickest and easiest way is to cre-
ate a Macro Control directly from a parameter. The other more elaborate method is to use the
Pages Pane in the Assignment Area.
(Macro) to directly switch to the Macro Controls of the focused chan-
Audio Routing, Remote Control, and Macro Controls
Creating Custom Sets of Parameters with the Macro Controls
MASCHINE MIKRO - Manual - 532