Native Instruments MASCHINE MIKRO MK3 Manual page 462

Selecting a Pattern
►
To select a Pattern in the current Pattern bank, press
sponding to the cell of the desired Pattern on the right display.
² Selecting a Pattern has the following consequences:
▪ This Pattern is displayed in the software9s Pattern Editor. You can then modify it both from
your controller and in the software.
▪ This Pattern is referenced by a Clip for the selected Group in the current Scene. This Clip
replaces any previous Clip for the Group in that Scene (see chapter
View for more on this).
Selecting Patterns and Pattern Banks on the Controller
Selecting a Pattern Bank
To select a Pattern located in another Pattern bank, you first need to select another Pattern
bank:
1. Press and hold PATTERN
2. Press the Right Arrow button to select Bank.
3. Turn the Encoder to select a Pattern bank.
Selecting a Pattern
►
To select a Pattern in the current Pattern bank, press
sponding to this Pattern.
²
When a Pattern is selected:
▪ This Pattern is displayed in the software9s Pattern Editor. You can then modify it both from
your controller and in the software.
▪ This Pattern is referenced for the selected Group in the current Scene. This Pattern repla-
ces any previous Pattern selected for the Group in that Scene (see chapter
Song View for more on this).
to enter Pattern mode.
PATTERN + the dim lit pad corre-
±16.3, Using Song
PATTERN + the dim lit pad corre-
±16.3, Using
MASCHINE MIKRO - Manual - 462
Working with Patterns
Managing Patterns