Switching Between The Master, Group, And Sound Level - Native Instruments MASCHINE MIKRO MK3 Manual

If the desired Sound does not appear in the Sound List, use the scroll bar at the right end of the
Pattern Editor or turn your mouse wheel while hovering the Pattern Editor to display any hidden
Sounds.
You can also select multiple Sounds at once to apply changes to all of them. See section
Selecting Multiple Sounds or Groups
Focusing on a Group using the Hardware
1. If necessary, press
the Group bank containing that Group.
2. Press GROUP + the pad
The corresponding Group is now in focus.
Focusing on a Sound using the Hardware
1. If you want to set the focus on a Sound located in another Group, first set the focus on its
Group as described above.
2. Press SELECT + the pad of the desired Sound (or simply press its pad if pads are in Pad
Mode).
²
The corresponding Sound is now in focus.
For information on how to quickly switch between the Master, Group, and Sound level in the
±3.3.4, Switching Between the Master, Group, and Sound
software, see section
You can also select multiple Sounds at once to apply changes to all of them. See section
Selecting Multiple Sounds or Groups
3.3.4

Switching Between the Master, Group, and Sound Level

At any time you can quickly switch the Control area between the parameters of the Master, the
focused Group, and the focused Sound.
for more information.
GROUP + the Left or Right Arrow button below the display to switch to
9316 of the desired Group.
for more information.
Basic Concepts
Common Operations
±5.1.3,
Level.
±5.1.3,
MASCHINE MIKRO - Manual - 77