Configuring The Main Output Of Sounds And Groups - Native Instruments MASCHINE MIKRO MK3 Manual

6. Turn the little knob on its left to adjust the input gain.
This is equivalent to setting the
12.1.2

Configuring the Main Output of Sounds and Groups

By default the outputs of all Sounds in a Group are sent to this Group, where they are mixed
together and processed by the Plug-ins loaded in the Group, if any. Similarly, by default the
outputs of all Groups are sent to the Master, where they are mixed together and processed by
the Plug-ins loaded in the Master, if any.
This default behavior can be customized to your liking: You can adjust the level and panoramic
position of the channel output, or send it to the Cue bus for pre-listening. Furthermore, you
could send individual Sounds or whole Groups to other pairs of outputs on your audio interface
in order to process them separately at a later stage. The output routing configuration is done
on the Audio page of the Output properties for Sounds and Groups.
We describe here the
lent page for the Master will be described in section
puts of MASCHINE.
The Audio page of the Output properties (here for a Sound) in the software.
Gain parameter described above.
Audio page of the Output properties for Sounds and Groups only. The equiva-
Audio Routing, Remote Control, and Macro Controls
±12.1.4, Configuring the Master and Cue Out-
MASCHINE MIKRO - Manual - 493
Audio Routing in MASCHINE