Native Instruments MASCHINE MIKRO MK3 Manual page 377

Element
Color
Glide
Advanced Page
The Advanced page contains parameters controlling the individual oscillators.
Element
HARMONICS Section
KTr. Mode (Key
Tracking Mode)
Mix
Description
Adjusts a simple filter which affects the brightness of the sound.
Available values range from 0.0 to 100.0 % (default: 50.0 %).
The tuning of the Fractal tom is locked for each note; in other words
the change in tuning is applied only when a new note is received.
When the Glide parameter is set higher than zero, the pitch glides
smoothly to the new tuning. The
duration this glide takes, measured in milliseconds: as you increase
the Glide value, the glide gets slower and more audible. This also
applies when the tom is played across the keyboard. Available
values range from None
default value is 5.5 ms.
Description
Selects from two key tracking modes: Harmonic (default) and
Dissonant.
In Harmonic mode all oscillators track the
Main page, see above) and your keyboard evenly. Therefore, the
drum stays in tune with itself as the
and can be played chromatically across the keyboard.
In Dissonant mode the oscillators track the
keyboard/pads unevenly. Therefore, the drum produces dissonant,
detuned harmonics when the
you play different notes.
Adjusts the mix between the tone oscillator and the feedback
oscillator bank, measured as a percentage. Available values range
from 0.0 % (tone oscillator only) to 100.0 % (feedback oscillator
bank only). The default value is 5.0 %.
Glide parameter then defines the
(no glide) to 350.0 ms (slowest glide). The
Tune
Tune parameter is adjusted,
Tune
Tune parameter is adjusted or when
MASCHINE MIKRO - Manual - 377
Using the Drumsynths
parameter (on the
parameter of your
The Toms