Page 2: Pitch / Envelope - Native Instruments MASCHINE MIKRO MK3 Manual

7.2.2

Page 2: Pitch / Envelope

Sampler parameters 3 page 2 of 6: PITCH / GATE and AMPLITUDE ENVELOPE in the software.
Parameter
PITCH / GATE
Tune
Start
Reverse
Type
AMPLITUDE ENVELOPE
The AMPLITUDE ENVELOPE
over time.
The Type selector.
The Type selector allows you to choose from three different types of amplitude envelopes. De-
pending on the selected type, the available parameters in the
will differ (see table below):
Description
Defines the basic pitch of your Sample: turn the knob to the right for
a higher pitch and to the left for a lower pitch.
Determines the start point of the Sample. This parameter can also be
modulated by the Velocity control, see
If Reverse is activated, the Sample will be played backwards.
Selects from three different types of amplitude envelopes. See below
for more information.
section allows you to tailor your Sample in terms of its loudness
±7.2.5, Page 5:
LFO.
AMPLITUDE ENVELOPE
MASCHINE MIKRO - Manual - 285
Working with Plug-ins
The Sampler Plug-in
section