Native Instruments MASCHINE MIKRO MK3 Manual page 369

The parameters described below are presented as they appear in the Control area (Arrange view).
The same parameters are available in the Plug-in panel within the Plug-in Strip (Mix view) 4 for
more information please refer to section
Main Page
Element
MAIN Section
Engine
Tune
Decay
TONE Section
Color
Metallic
Strike
Character
±13.4, The Plug-in
Description
Selects the engine used in the Hybrid plug-in. For more information
on the available engines, please refer to section
Adjusts the pitch of the cymbal played by the middle C, measured
as a percentage. Available values range from 0.0% to 100.0%
(default: 50.0%).
Adjusts the duration of the sound9s tail, measured as a percentage.
Available values range from 0.0 to 100.0% (default: 65.0%).
Adjusts the cutoff frequency of several low-pass filters in order to
achieve the desired timbre. Available values range from 0.0 to
100% (default: 71.5%).
Adjusts an enharmonic metallic character, measured as a
percentage. Available values range from 0.0 to 100.0% (default:
0.0%).
Adjusts the amount of click or initial attack, measured as a
percentage. Available values range from 0.0 to 100.0% (default:
80.0%).
Adjusts a wider range of timbers from noisy to metallic, measured
as a percentage. Available values range from 0.0 to 100.0%
(default: 25.0%).
Strip.
±9.4, The
MASCHINE MIKRO - Manual - 369
Using the Drumsynths
The Hi-hats
Hi-hats.