To Set A Hardware Breakpoint (On Processor Breakpoint Registers); To Use Command Line Editing; To Build Scripts; To Flash Memory - Agilent Technologies E5900B User Manual

Troubleshooting the Emulation Probe
Using the Emulation Probe Command Line Interface
To set a hardware breakpoint (On processor breakpoint
registers)
(Use this type of breakpoint when debugging ROM)
bc -e hwbp
bc -h -p 204
address
r To run the program and hit the hardware
bp -h -r *
? bp

To use command line editing

<cntrl>-r
<cntrl>-b
? cl
cl -e
<ESC>

To build scripts

To build scripts, get the emulload utility from our web site
http://software.cos.agilent.com/TornadoBackEnd/index.html.
Choose a host (at the bottom of the web page), select Continue, and download
the compressed backend file. This is a unsupported utility but it will work for
most scripts that you may want to build. It is unsupported in that if you find a
defect with it we may choose not to fix the defect. The source code of the
utility is also available. The emulload utility also has the ability to download
ELF, COFF, IEEE695 and S-record files.

To flash memory

This is best left to a debugger interface.
You may also want to use the Emulation Control Interface in the logic analysis
system to flash target ROM.
In addition we provide some information at our Web site on how to build
scripts to flash parts. Go to www.agilent.com and search for "programming
136
Enable Hardware Breakpoints
To set a hardware breakpoint at
204
breakpoint !ASYNC_STAT
breakpoint: 00000204
To remove all hardware breakpoints
To see additional bp capabilities
(Hardware Breakpoints can be set on
memory transactions also)
To recall last command(s) backward
To recall last command(s) forward
To show you how to do it
To enable command line editing
To enter command line editing mode
601! Hardware
Emulation for the Motorola M•CORE