Figure 13 Device Configuration; Figure 14 Advanced Device Configuration - Plug&Play Driver - Agilent Technologies 8163A Programming Manual

Using Visual Programming Environments
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Fifth Edition
Double-click on the
2
screen, see Figure 13 .

Figure 13 Device Configuration

Enter the following information:
3
•
Name
•
Interface
•
Address
default is 7). Append the GPIB address of your instrument (the
default is 20).
To find out or change the instrument's GPIB address, press the Config
N O T E
hardkey on the instrument's front panel and choose GPIB address. The
instrument's GPIB address appears, you may edit it if you wish.
•
Gateway
Press
4
pops up. Select the Plug&play Driver tab, the box in Figure 14 appears.
Figure 14 Advanced Device Configuration - Plug&play Driver
Select hp816X from the Plug&play Driver Name drop-down list.
5
The Agilent 816x VXIplug&play Instrument Driver
button to bring up the Device Configuration
Add
: enter hp816X.
:
GPIB
: Enter the GPIB address of your GPIB interface board (the
: .
This host
, the Advanced Device Configuration box
Advanced I/O Config ...
219