Meas Setup - Agilent Technologies ESA-E Series User Manual

Meas Setup

If in a measurement, displays one of five measurement setup menus.
The setup menu displayed depends on which measurement (
Channel Power
selected in the
ACP Meas Setup Menu Keys
To access the following keys for setting up an adjacent channel power
measurement, press

Meas Setup

Press
Avg Number
used when calculating the measurement result. The average will be
On Off
displayed at the end of each sweep.
measurement averaging.
When combined with
Main Chan BW
the range of integration used in calculating the power in the center
reference channel. Changing
Adj Chan BW
When combined with
Adj Chan BW
the range of integration used in calculating the power for the upper and
lower adjacent channels.
Allows you to specify the difference between the center frequency of the
Chan Spacing
center channel and the center frequency of both adjacent channels.
Adjacent channels must be symmetrical.
Channel Power Meas Setup Menu Keys
To access the following keys for setting up a channel power
measurement, press
Meas Setup
Press
Avg Number
used when calculating the measurement result. The average will be
On Off
displayed at the end of each sweep.
measurement averaging.
Allows you to specify the range of integration used in calculating the
Integration BW
power in the channel.
Allows you to set the analyzer span for the channel power
Chan Pwr Span
measurement.
Chapter 6
,
Occupied BW
menu.
MEASURE
MEASURE
key.
to specify the number of measurement averages
Avg Number (On)
Chan Spacing
and
Chan Spacing
Chan Spacing
MEASURE
key.
to specify the number of measurement averages
Avg Number (On)
Front-Panel Key Reference
, ,
Emission BW Harmonic Dist
, and then the front panel
ACP
Avg Number (Off)
,
Main Chan BW
automatically changes
Main Chan BW
to the same value.
,
Adj Chan BW
, and then the front panel
Channel Power
Avg Number (Off)
Meas Setup
,
ACP
) has been
disables the
allows you to specify
allows you to specify
disables the
6-51