interface
speed (auto|10-full||10-half| 100-
full|100-half|1000-full)
interface
shutdown
interface
no shutdown
configure interface range
gigabitethernet1/0/PORTLISTS
if-range
shutdown
if-range
no shutdown
if-range
speed (auto|10-full||10-half| 100-
full|100-half|1000-full)
Example:
L2SWITCH#configure terminal
L2SWITCH(config)#interface gi1/0/1
L2SWITCH(config-if)#speed auto
5.4.1.2. Web Configuration
This command configures the speed and
duplex for the port.
This command disables the specific port.
This command enables the specific port.
This command enters the if-range
configure node.
This command disables the specific ports.
This command enables the specific ports.
This command configures the speed and
duplex for the port.
55