Tripp Lite NGI-M08C4POE8-2 Owner's Manual page 297

10. If reboot_flag=1, save running configuration and reboot the switch; otherwise, wait 24
hours and go back to step 1.
Default Settings
Auto provision configuration profile:
Active
Version
Protocol
FTP user/pwd
Folder
Server address
9.2.1 CLI Configurations
Node
enable show auto-provision
enable configure terminal
configure auto-provision
auto-provision show
auto-provision active (enable|disable)
auto-provision server-addressIPADDR This command configures the auto provision
auto-provision protocol (tftp|http|ftp)
auto-provision FTP-user username
STRING password
STRING
auto-provision folder STRING
auto-provision no folder
auto-provision no FTP-user
: Disable
: 0
: FTP
: /
:
:
Command
This command displays the current auto provision
configurations.
This command changes the node to configure
node.
This command enters the auto-provision node.
This command displays the current auto provision
configurations.
This command enables/disables the auto
provision function.
server's IP.
The command configurations the upgrade
protocol.
The command configurations the username and
password for the FTP server.
The command configurations the folder for the
auto provision server.
The command configurations the folder to
default.
The command configurations the username and
password to default.
297
Description