Web Configuration Interface; Logging Into The Web Configuration Interface - Tripp Lite NetCommander B070-008-19-IP Owner's Manual

Netcommander ip cat5 kvm switch

Hide thumbs Also See for NetCommander B070-008-19-IP:

Table of Contents

2 . Web Configuration Interface

The NetCommander IP can be accessed in two ways: locally via the local console OSD, or remotely via the Web Configuration Interface.

This section of the manual details the Web Configuration Interface, which can be used to access the computer/servers and other devices

connected to the KVM, as well as to configure the KVM's settings and accounts.

Note:

• Before logging on the first time, verify that you have the latest Java installed on your computer (Java 1.6 or higher is required). If not, you

can download and install Java from http://www.java.com/en/download/index.jsp.

• Only SSL connections are allowed, so you must start the IP address with HTTPS, not HTTP .

Open your web browser (see the Client Computer Compatibility section of this manual for browser support) and enter in the IP address

of the KVM.

When logging into the KVM from your web browser, a Security Alert message appears to inform you that the device's certificate is not

trusted, and asks if you want to proceed. You have two options:

• If you are working on a computer other than your own, accept the certificate for just this session by clicking to proceed.

• If you are working at your own computer, install the certificate. Reference the instructions in the Security Certificate Installation

section of this manual.

Upon installing the certificate or accepting the unrecognized certificate for the current session, the Java application begins to install.

Before the installation completes, a security warning may appear stating that the connection to this website is untrustworthy. This is

a security issue similar to one you get from your web browser. You can choose to continue anyway, or install the certificate in the Java

control panel. Refer to the Security Certificate Installation section of this manual for further instructions.

After installation has completed, the login page appears. If the login page does not appear on its own, click the Log On button in the

center of the web page to bring it up. If clicking on the Log On button does not bring up the login page, add /targets.jnlp to the end of

your IP address.

14-03-051 93-32D5.indd 13

3/14/2014 9:52:21 AM

Table of Contents