Table of Contents
Advertisement
9.2 Auto Provision
Auto provision is a service that service provider can quickly, easily and automatically
configure remote device or doing firmware upgrade at remote side.
1. When the Auto Provision is enabled, the Switch will download the auto provision information
file from the auto provision server first.
The file name is followed below naming rule:
Model_Name_Autoprovision.txt
For Example: NGI-M08C4POE8-2_Autoprovision.txt
The contents of the file are listed below:
AUTO_PROVISION_VER=1
Firmware_Upgrade_State=1
Firmware_Version=8648-000-1.4.1.S0
Firmware_Image_File=8648-000-1.4.1.S0.fw
Firmware_Reboot=1
Global_Configuration_State=0
Global_Configuration_File=8648-000-1.1.0.S0.save
Global_Configuration_Reboot=0
Specific_Configuration_State=0
Specific_Configuration_Reboot=0
2. If AUTO_PROVISION_VER is biggest than current auto provision version, do step 3;
otherwise, wait 24 hours and go back to step 1.
3. If the Firmware_Upgrade_State =1, do step 4; otherwise, do step 6.
4. If the Firmware_Version is difference than current firmware version, download the
Firmware_Image_File and upgrade firmware.
5. If upgrade firmware succeeded and Firmware_Reboot=1, let reboot_flag=1.
6. If the Global_Configuration_State =1, download the Global_Configuration_File and
upgrade configuration; otherwise, do step 8.
7. If upgrade configutation succeeded and Global_Configuration_Reboot =1, let
reboot_flag=1.
8. If the Specific_Configuration_State =1, download the specific configuration file and
upgrade configuration; otherwise do step 10. The naming is "Model_Name _" with 12-bit
MAC digits ,example for following is "NGI-M08C4POE8-2_00e04c8196b9.txt"
9. If upgrade configutation succeeded and Specific_Configuration_Reboot =1, let
reboot_flag=1.
296
Advertisement
Table of Contents
