Web Configuration Interface; Logging Into The Web Configuration Interface - Tripp Lite NetCommander B070-016-19-IP2 Owner's Manual

2 . Web Configuration Interface

The NetCommander IP can be accessed in two ways: locally via the local console OSD, or remotely via the Web Configuration Interface.
This section of the manual details the Web Configuration Interface, which can be used to access the computer/servers and other devices
connected to the KVM, as well as to configure the KVM's settings and accounts.

2 .1 Logging Into the Web Configuration Interface

Notes:
• Before logging on the first time, verify the latest Java version (1.8 or 1.9) is installed on your computer. If the Java Runtime Environment is not installed on
the client PC, a popup window similar to the one below will likely appear.
To resolve this issue, install a supported version of Java (1.8 or 1.9).
• Once a supported JRE has been installed, restart the browser and retry accessing the KVM Web Configuration Interface.
• The installed version of Java may require the KVM Web Configuration Interface be added to an exception list. In such cases, upon logging into the KVM
application, a popup window similar to the one below will appear.
15