Tripp Lite NGI-M08C4POE8-2 Owner's Manual page 272

8. Monitor
8.1 Alarm
The feature displays if there are any abnormal situation need process immediately.
Notice: The Alarm DIP switch allow users to configure if send alarm message when the
corresponding event occurs.
Example:
P1: ON, The Switch will send alarm message when port 1 is link down.
PWR: ON, The Switch will send alarm message when the main power supply disconnect.
RPS: ON, The Switch will send alarm message when the redundant power supply disconnect.
8.1.1 CLI Configurations
Node Command
enable show alarm-info
8.1.2 Web Configurations
Parameter
Alarm Information
Alarm Status
Alarm Reason(s)
DIP switch Settings
DIP Switch
Status
This command displays alarm information.
Description
This field indicates if there is any alarm events.
This field displays all of the detail alarm events.
The field displays the DIP Switch name.
The field indicates the DIP Switch current status.
272
Description