Apply
Click Apply to take effect the settings.
Refresh
Click Refresh to begin configuring this screen afresh.
6.1.1.3 Priority/Queue Mapping
6.1.1.3.1 CLI Configuration
Node
Command
enable
show queue cos-map
enable
configure terminal
configure
queue cos-map <0-7>
<0-7>
configure
no queue cos-map
Example:
L2SWITCH(config)#queue cos-map 0 1
Success!
L2SWITCH(config)#queue cos-map 1 2
Success!
L2SWITCH(config)#queue cos-map 2 3
Success!
L2SWITCH(config)#queue cos-map 3 4
Success!
L2SWITCH(config)#queue cos-map 4 5
Success!
L2SWITCH(config)#queue cos-map 5 6
Success!
L2SWITCH(config)#queue cos-map 6 7
Success!
L2SWITCH(config)#queue cos-map 7 0
Success!
L2SWITCH(config)#exit
L2SWITCH#show queue cos-map
The mapping of the Priority to Queue are:
PRIO 0 ==> COSQ 1
PRIO 1 ==> COSQ 2
PRIO 2 ==> COSQ 3
PRIO 3 ==> COSQ 4
PRIO 4 ==> COSQ 5
PRIO 5 ==> COSQ 6
PRIO 6 ==> COSQ 7
PRIO 7 ==> COSQ 0
Description
This command displays the current 802.1p priority
mapping to the service queue.
This command changes the node to configure node.
This command configures the 802.1p priority
mapping to the service queue.
This command configures the 802.1p priority
mapping to the service queue to default.
65