Web Configuration - Tripp Lite NGI-M08C4POE8-2 Owner's Manual

6.3.3.1.2 Web Configuration

Parameter Description
GARP Settings
Select Enable to activate GVRP function to exchange VLAN
GVRP State configuration information with other GVRP switches. Select Disable
to deactivate the feature.
Port Select the port that you want to configure the GVRP settings.
Select Enable to activate the port GVRP function. Select Disable to
State
deactivate the port GVRP function.
Select Normal to allows dynamic creation (if dynamic VLAN
creation is enabled), registration, and deregistration of VLANs on the
Registration Mode trunk port.
Select Forbidden to deregister all VLANs (except VLAN 1) and
prevents any further VLAN creation or registration on the trunk port.
Click Apply to take effect the settings.
Apply
Refresh Click Refresh to begin configuring this screen afresh.
112