Table of Contents
Advertisement
) MONTH HOUR
configure
time ntp-server (disable|enable) This command disables / enables the NTP
configure
time ntp-server IP_ADDRESS
configure
time ntp-server domain-name
STRING
configure
time timezone STRING
Example:
L2SWITCH(config)#time ntp-server 192.5.41.41
L2SWITCH(config)#time timezone +0800
L2SWITCH(config)#time ntp-server enable
L2SWITCH(config)#time daylight-saving-time start-date first Monday 6 0
L2SWITCH(config)#time daylight-saving-time end-date last Saturday 10 0
5.1.3.2. Web Configuration
server state.
This command sets the IP address of your time
server.
This command sets a domain name of your
time server.
Configures the time difference between UTC
(formerly known as GMT) and your time zone.
Valid Range: -1200 ~ +1200.
40
Advertisement
Table of Contents
