Group Settings; Cli Configuration; Web Configuration - Tripp Lite NGI-M08C4POE8-2 Owner's Manual

Configures the source port(s) for the MVR. Normally the source ports are
Source Ports
connected to the streaming server.
Receive Ports Configures the receive port(s) for the MVR. Normally the source ports are
connected to the streaming client
Configures the tagged port(s) for the MVR. Same as the VLAN tagged
Tagged Ports
port.
Apply
Click Apply to take effect the settings.
Refresh
Click Refresh to begin configuring this screen afresh.

6.2.4.2 Group Settings

6.2.4.2.1 CLI Configuration

Node Command
enable show mvr
enable show mvr vlan
VLANLISTS
enable configure terminal
configure mvr VLANLISTS
MVR group STRING
start-address
IPADDR VALUE
MVR no group
MVR no group name
STRING

6.2.4.2.2 Web Configuration

Description
This command displays the current MVR
configurations.
This command displays the current MVR configurations
of the specific VLAN.
This command changes the node to configure node.
This command configures the MVR configurations for
the specific VLAN.
This command configures a multicast group
configuration for the MVR.
This command removes all of the multicast group
configurations from the MVR.
This command removes the multicast group
configurations from the MVR.
94