3
4
5
6
7
6.1.1.1 Port Priority
6.1.1.1.1 CLI Configuration
Node
Command
enable
show interface
IFNAME
enable
configure terminal
configure
interface IFNAME
interface
default-priority <0-7>
interface
no default-priority
6.1.1.1.2 Web Configuration
3
Critical Applications
4
Video, <100ms latency
5
Video, < 10ms latency
6
Internetwork Control
7 (highest)
Network Control
This command displays the current port
configurations.
This command changes the node to configure node.
This command enters the interface configure node.
This command allows the user to specify a default
priority handling of untagged packets received by the
Switch. The priority value entered with this command
will be used to determine which of the hardware
priority queues the packet is forwarded to. Default: 0.
This command configures the default priority (0) for
the specific port.
61
Description