Power Delay; Cli Configuration - Tripp Lite NGI-M08C4POE8-2 Owner's Manual

Refresh

6.11.3 Power Delay

The Power Delay allows the user to setting the delay time of power providing after device
rebooted.

6.11.3.1 CLI Configuration

Node
enable show poe power-delay
enable configure terminal
configure interface IFNAME
interface poe power-delay(enable|disable)
interface poe power-delay time <0-300>
configure interface range
gigabitethernet1/0/PORTLISTS
if-range poe power-delay(enable|disable)
if-range poe power-delay time <0-300>
Click Refresh to begin configuring this screen afresh.
Command
174
Description
This command displays the PoE power delay
configurations.
This command changes the node to configure
node.
This command enters the interface configure
node.
This command enables / disables of the Power
Delay function for the specific port.
This command configures the delay time of
the Power Delay for the specific port.
This command enters the if-range configure
node.
This command enables / disables of the Power
Delay function for the range of ports.
This command configures the delay time of
the Power Delay for the range of ports.