Table of Contents
Advertisement
6.3.6.1 CLI Configuration
Node
enable
show protocol-vlan
enable
configure terminal
configure
protocol-vlan frame-type ethernetII
ether-type STRINGS vlan <1-4094>
ports PORTLISTS
configure
protocol-vlan frame-type nonLLC-
SNAP vlan <1-4094> ports
PORTLISTS
configure
protocol-vlan frame-type LLC-SNAP
vlan <1-4094> ports PORTLISTS
configure
no protocol-vlan frame-type ethernetII
ether-type STRINGS vlan <1-4094>
configure
no protocol-vlan frame-type nonLLC-
SNAP vlan <1-4094>
configure
no protocol-vlan frame-type LLC-
SNAP vlan <1-4094>
configure
no protocol-vlan all
Example:
L2SWITCH(config)#protocol-vlan frame-type LLC-SNAP vlan 12 ports 1-2
L2SWITCH(config)#protocol-vlan frame-type nonLLC-SNAP vlan 13 ports 3-4
L2SWITCH(config)#protocol-vlan frame-type ethernetII ether-type 0800 vlan 14 ports 1-2
6.3.6.2 Web Configuration
Command
118
Description
This command displays the all of the
protocol-vlan configurations.
This command changes the node to
configure node.
This command creates a protocol-vlan entry
with ethernetII frame type.
This command creates a protocol-vlan entry
with nonLLC-SNAP frame type.
This command creates a protocol-vlan entry
with LLC-SNAP frame type.
This command deletes a protocol-vlan entry
with ethernetII frame type.
This command deletes a protocol-vlan entry
with nonLLC-SNAP frame type and vlan.
This command deletes a protocol-vlan entry
with LLC-SNAP frame type and vlan.
This command deletes all of the protocol-
vlan entries.
Advertisement
Table of Contents
