Tripp Lite NGI-M08C4POE8-2 Owner's Manual page 262

Guest VLAN
Max-req Time
Reauth period
Quiet period
Supp timeout
Server timeout
Reset to Default
Apply
Refresh
authorized.
Select Force Unauthorized to always force this port to be
unauthorized. No packets can pass through this port.
Select Disable to disable Guest VLAN on the port.
Select Enable to enable Guest VLAN on the port.
Specify the amount of times the Switch will try to connect to the
authentication server before determining the server is down. The
acceptable range for this field is 1 to 10 times.
Specify how often a client has to re-enter his or her username
and password to stay connected to the port. The acceptable
range for this field is 0 to 65535 seconds.
Specify a period of the time the client has to wait before the next
re-authentication attempt. This will prevent the Switch from
becoming overloaded with continuous re-authentication attempts
from the client. The acceptable range for this field is 0 to 65535
seconds.
Specify how long the Switch will wait before communicating
with the server. The acceptable range for this field is 0 to 65535
seconds.
Specify how long the Switch to time out the Authentication
Server. The acceptable range for this field is 0 to 65535 seconds.
Select this and click Apply to reset the custom 802.1x port
authentication settings back to default.
Click Apply to take effect the settings.
Click Refresh to begin configuring this screen afresh.
262