Web Configuration - Tripp Lite NGI-M08C4POE8-2 Owner's Manual

6.3.1.2 Web Configuration

Parameter Description
Port Isolation Settings
Select a port number to configure its port isolation settings.
Select All Ports to configure the port isolation settings for all ports on
Port
the Switch.
An egress port is an outgoing port, that is, a port through which a data
packet leaves.
Egress Port
Selecting a port as an outgoing port means it will communicate with
the port currently being configured.
Click Select All to mark all ports as egress ports and permit traffic.
Select All/ Click Deselect All to unmark all ports and isolate them.
Deselect All Deselecting all ports means the port being configured cannot
communicate with any other port.
Apply Click Apply to take effect the settings.
101