if-range
dhcp-snooping host count <1-
32>
if-range
no dhcp-snooping host count
if-range
dhcp-snooping trust
if-range
no dhcp-snooping trust
7.1.1.2.2 Web Configurations
Parameter
Port Settings
Port
Trust
Maximum Host
Count
Apply
Refresh
This command configures the maximum host
count for the specific ports.
This command configures the maximum host
count to default for the specific ports.
The default host count is 32.
This command configures the trust port for the
specific ports.
This command configures the un-trust port for
the specific ports.
Description
Select a port number to modify its configurations..
Configures the specific port if it is a trust port.
Enter the maximum number of hosts (1-32) that are permitted to
simultaneously connect to a port.
Click Apply to take effect the settings.
Click Refresh to begin configuring this screen afresh.
239