Tripp Lite NGI-M08C4POE8-2 Owner's Manual page 254

means the profile will filter the one MAC configured in Source MAC
field.
Destination MAC Configures the destination MAC of the packets that you want to filter.
Configures the bitmap mask of the destination MAC of the packets that
you want to filter.
Mask of
If the Destination MAC field has been configured and this field is
Destination MAC
empty, it means the profile will filter the one MAC configured in
Destination MAC field.
DSCP Configure the DSCP for the profile.
802.1p Configures the 802.1p for the profile.
Source IP Configures the source IP of the packets for the profile.
Configures the bitmap mask of the source IP of the packets for the
profile.
Mask of Source IP
If the Source IP field has been configured and this field is empty, it
means the profile will filter the one IP configured in Source IP field.
Destination IP Configures the destination IP of the packets for the profile.
Configures the bitmap mask of the destination IP of the packets for the
profile.
Mask of
If the Destination IP field has been configured and this field is empty,
Destination IP
it means the profile will filter the one IP configured in Destination IP
field.
Configures the IP protocol type. The setting will be used for Source
Application and Destination Application.
IP Protocol
TCP:0x06. UDP:0x11.
Source Application Configures the source UDP/TCP ports of the packets for the profile.
Destination Configures the destination UDP/TCP ports of the packets for the
Application profile.
Configures one or a rage of the source interfaces of the packets for the
Source Interface(s)
profile.
Apply Click Apply to take effect the settings.
Refresh Click Refresh to begin configuring this screen afresh.
254