Tripp Lite NGI-M08C4POE8-2 Owner's Manual page 283

9.1.1 SNMP
9.1.1.1 SNMP Settings
9.1.1.1.1 CLI Configurations
Node Command
enable show snmp
enable configure terminal
configure snmp (disable|enable)
configure snmp system-contact
STRING
configure snmp system-location
STRING
configure snmp system-name
STRING
configure no snmp system-
contact STRING
configure no snmp system-
location STRING
configure no snmp system-
name STRING
Example:
L2SWITCH#configure terminal
L2SWITCH(config)#snmp enable
L2SWITCH(config)#snmp community public rw trusted-host 192.168.200.106/24
L2SWITCH(config)#snmp trap-receiver 192.168.200.106 v2c public
L2SWITCH(config)#snmp system-contact IT engineer
L2SWITCH(config)#snmp system-location Branch-Office
9.1.1.1.2 Web Configurations
Description
This command displays the SNMP configurations.
This command changes the node to configure node.
This command disables/enables the SNMP on the
switch.
This command configures contact information for the
system.
This command configures the location information for
the system.
This command configures a name for the system.
(The System Name is same as the host name)
This command resets the contact information for the
system.
This command resets the location information for the
system.
This command resets the system name for the system.
283