Web Configuration Interface; Logging Into The Web Configuration Interface - Tripp Lite NetCommander B070-016-19-IP Owner's Manual

10. Web Configuration Interface

The Web Configuration Interface is a Java-based utility that allows administrators to configure KVM network and security settings, create and manage user
accounts, and upgrade the IP portion of the KVM firmware. The sections that follow tell you how to log into the Web Configuration Interface, and use the
different settings available to the KVM administrators.
Note: The Web Configuration Interface controls settings/accounts for the IP portion of the KVM only. Settings/account access for the local console are set via
the Local Console OSD.

11. Logging into the Web Configuration Interface

Logging In
1. Open your web browser and enter the IP address assigned to the KVM.
Note:
• Only SSL connections are allowed, so you must start the IP address with
HTTPS, and not HTTP.)
• When logging in using a Windows XP computer, add /ui.jnlp to the end of
the IP address.
2. If a screen appears that states there is a problem with the web site's security
certificate, click on the option to proceed anyway; the certificate can be trusted.
The Log On page appears, and the Java-based application begins to install.
3. Prompts will appear asking if you wish to proceed with the Java installation.
Click the option to continue. Note: In the prompts that appear, select the
option to always trust content from this source to prevent these prompts
from appearing every time you log on.
4. When the installation is complete, the username and password screen appears.
5. Enter in your username and password as given to you by your system
administrator, and select from the drop-down menu beneath the username and
password fields whether you want to access the Web Configuration Interface or
to Remotely Access the connected computers. Click the Enter key to proceed.
201204110 93-2924.indd 8
Web Configuration Interface Main Page
When logging into the Web Configuration Interface, it opens with the
Configuration interface in the main portion of the screen, with the Device
page displayed.
At the very top of the Web Configuration Interface are menu bars and icons
that allow you to perform various functions. These functions, as well as all of
the settings in the Web Configuration Interface, are described in the sections
that follow.
File Menu
The File Menu in the upper-left of the screen includes three items; Log On/
Off, Close All and Exit.
Log On/Off – When selected, it will close the Web Configuration interface and
display the username and password screen. This function can also be performed
by clicking on the Log On/Off button directly underneath the File Menu.
Close All – When selected, it will close the Configuration interface in the
main part of the screen, but the rest of the Web Configuration Interface will
remain open. Click the Configuration button to open the Configuration
interface back up.
Exit – When selected, the Web Configuration Interface is closed altogether.
8
8/2/2012 10:15:53 AM