SAVE THESE INSTRUCTIONS! This manual contains important instructions and warnings that should be followed during the installation, operation and storage of this Tripp Lite product. Failure to heed these warnings may affect your warranty. Switch Location Warnings • The switch is designed for indoor use only, in a controlled environment, away from excess moisture, temperature extremes, conductive contaminants, dust or direct sunlight.
Tripp Lite Service Representative for assistance. • Never attempt to install or use the switch during a thunderstorm. Package Includes • NG5POE, NG8POE or NG16POE Unmanaged Network Gigabit Ethernet Switch with POE • Detachable Power Cord • Mounting Brackets (2) •...
Page 5
• NG5POE only: PoE (Power over Ethernet) is limited to ports 1-4. LEDs illuminate green for all network connection speeds. • NG8POE and NG16POE only: LEDs illuminate orange for 10/100 Mbps network connections and green for 1000 Mbps network connections.
Quick Installation Desktop Installation Attach the four included rubber feet to the bottom of the unit. Place the switch on a flat desktop surface. Inspect and install the power adapter to a proper AC FLAT DESKTOP SURFACE power source. Connect the power supply to the switch. The Power LED will illuminate when the switch turns on.
Page 7
Quick Installation 1U Rackmount Installation The NG8POE is shown in the installation diagram. The other two models can also be rack mounted. Attach the mounting brackets to each side of the switch with the included screws. Be sure the mounting bracket “ears” are facing forward.
5-Year Limited Warranty TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of five (5) years from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products.
Page 9
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications to this equipment not expressly approved by Tripp Lite could void the user’s authority to operate this equipment.
Este manual contiene instrucciones y advertencias importantes que deben seguirse durante la instalación, la operación y el almacenamiento de este producto Tripp Lite. La omisión en la observancia de estas advertencias puede afectar la garantía. Advertencias para la Ubicación del Switch •...
Representante de Servicio de Tripp Lite. • Nunca intente instalar o usar el switch durante una tormenta eléctrica. El paquete incluye • Switch Gigabit Ethernet para Red No Administrada con PoE NG5POE, NG8POE o NG16POE • Cable de Alimentación Desprendible • Soportes para Instalación (2) •...
Page 14
• NG5POE solamente: PoE (Energía sobre la Ethernet) está limitado a los puertos 1-4. Los LEDs se encienden en verde para todas las velocidades de conexión de red. • NG8POE y NG16POE solamente: Los LEDs se encenderán en anaranjado para conexiones de red de 10/100 Mbps y verde para conexiones de red de 1000 Mbps.
Instalación Rápida Instalación de Escritorio Fije las cuatro patas de caucho incluidas a la parte inferior de la unidad. Coloque el switch sobre una superficie plana de escritorio. Inspeccione e instale el SUPERFICIE DE ESCRITORIO PLANA adaptador de corriente a una fuente adecuada de alimentación de CA.
Page 16
Instalación Rápida Instalación en Rack de 1U Se muestra el NG8POE en el diagrama de instalación. También los otros dos modelos se pueden instalar en rack. Con los tornillos incluidos, instale los soportes de instalación a cada lado del switch.
Page 17
Autorización de Devolución de Mercancía (RMA) de TRIPP LITE o de un centro de servicio autorizado de TRIPP LITE. Los productos deben ser regresados a TRIPP LITE o a un centro de servicio autorizado de TRIPP LITE con los cargos de transporte prepagados y deben acompañarse con una breve descripción del problema y un comprobante de la fecha y el lugar de compra.
Page 18
El usuario debe usar cables y conectores blindados con este equipo. Cualquier cambio o modificación en este equipo que no esté aprobado expresamente por Tripp Lite puede invalidar la autoridad del usuario para operarlo.
Ce manuel contient des instructions et des avertissements importants qui doivent être respectés pendant l'installation, l'utilisation et l'entreposage de ce produit Tripp Lite. Le non-respect de ces avertissements pourrait nuire à la garantie. Mises en garde concernant le placement du commutateur •...
Page 21
• Si l'adaptateur de puissance est endommagé, ne pas tenter de connecter le commutateur. Contacter un représentant du service de Tripp Lite pour obtenir de l'aide. • Ne jamais tenter d'installer ou d'utiliser le commutateur pendant un orage.
Caractéristiques du produit NG5POE 5-Port 10/100/1000Mbps PoE Ethernet Switch 10/100/1000Mbps PoE Ethernet Switch NG8POE NG16POE 16-Port 10/100/1000 Mbps PoE Power Ethernet Switch LNK/ACT/SPEED LNK/ACT/SPEED 17-06-328-9335EB.indb 22 6/20/2017 2:37:15 PM...
Page 23
1 à 4. Les voyants à DEL s’allument de couleur verte pour toutes les vitesses de connexion du réseau. • NG8POE et NG16POE seulement : les voyants à DEL s’allument de couleur organe pour les connexions au réseau de 10/100 Mbps et de couleur verte pour les connexions au réseau de 1 000 Mbps.
Installation rapide Installation sur un dessus de bureau Fixer les quatre pieds en caoutchouc inclus à la partie inférieure de l'appareil. Placer le commutateur sur une surface solide et à plat. Inspecter et installer l'adaptateur de puissance à une source d'alimentation CA SURFACE DE BUREAU À...
Page 25
Installation rapide Installation à montage en bâti 1U Le NG8POE est illustré dans le diagramme d’installation. Les deux autres modèles peuvent également être montés en bâti. Fixer les supports de montage à chaque côté du commutateur avec les vis incluses. Les «...
TRIPP LITE garantit que ses produits sont exempts de vices de matériaux et de fabrication pendant une période de cinq (5) ans à partir de la date d'achat initiale. L'obligation de TRIPP LITE, en vertu de la présente garantie, se limite à la réparation ou au remplacement (à...
Page 27
• Brancher l'équipement à une prise sur un circuit différent de celui sur lequel le récepteur est branché. • Consulter le fournisseur ou un technicien radio/TV pour obtenir de l'aide. Tout changement ou modification apportés à ce matériel sans l'autorisation expresse de Tripp Lite peuvent annuler le droit de l'utilisateur d'utiliser cet équipement.
Page 28
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support 17-06-328 93-35EB_RevD 17-06-328-9335EB.indb 28 6/20/2017 2:37:16 PM...
Need help?
Do you have a question about the NG8POE and is the answer not in the manual?
Questions and answers