Tripp Lite NGI-M08C4POE8-2 Owner's Manual page 300

9.3.2 CLI Configurations
Node
enable show mail-alarm
enable configure terminal
configure mail-alarm (disable|enable)
configure mail-alarm auth-account
configure mail-alarm mail-from
configure mail-alarm mail-to
configure mail-alarm server
name) STRINGS server-port VALUE
configure mail-alarm server
name) STRINGS server-port default
configure mail-alarm trap-event (reboot|link-
change|config.|firmware|login|port-
blocked|alarm) (disable|enable)
configure mail-alarm utf8-encoding
(disable|enable)
Command
(ip|ipv6|domain-
(ip|ipv6|domain-
300
Description
This command displays the Mail Alarm
configurations.
This command changes the node to
configure node.
This command disables / enables the
Mail Alarm function.
This command configures the Mail
server authentication account.
This command configures the mail
sender.
This command configures the mail
receiver.
This command configures the mail server
IP address / domain name and the TCP
port.
This command configures the mail server
IP address / domain name and configures
25 as the server's TCP port.
This command disables / enables mail
trap events.
This command disables / enables the
UTF8 encoding for mail content.