Stp Status; Cli Configurations - Tripp Lite NGI-M08C4POE8-2 Owner's Manual

BPDU Guard
ROOT Guard
Apply
Refresh
STP Port Status
Active
Role
Status
Path Cost
Priority
Edge Port
BPDU Filter
BPDU Guard
ROOT Guard

6.15.4.4 STP Status

6.15.4.4.1 CLI Configurations

Node Command
enable show spanning-tree mst root This command displays the root bridge
Enables/Disables the BPDU guard function for the specific port.
Enables/Disables the BPDU root guard function for the specific port.
Click Apply to take effect the settings.
Click Refresh to begin configuring this screen afresh.
The state of the STP function.
The port role. Should be one of the Alternated / Designated / Root /
Backup / None.
The port's status. Should be one of the Discarding / Blocking /
Listening / Learning / Forwarding / Disabled.
The port's path cost.
The port's priority.
The state of the edge function.
The state of the BPDU filters function.
The state of the BPDU guards function.
The state of the BPDU Root guard function.
configurations.
223
Description