Cli Configuration; Web Configuration - Tripp Lite NGI-M08C4POE8-2 Owner's Manual

224.0.1.40 Cisco Auto-RP-Discovery address
224.0.1.41 H.323 Gatekeeper discovery address

6.2.5.1 CLI Configuration

Node
enable show mac-address-table
multicast
enable show mac-address-table
multicast vlan <1-4094>
enable configure terminal
configure mac-address-table multicast
MACADDR vlan <1-4094>
ports PORTLIST
configure no mac-address-table multicast
MACADDR

6.2.5.2 Web Configuration

Parameter Description
Static Multicast Address Settings
VLAN ID Configures the VLAN that you want to configure.
MAC Configures the multicast MAC which will not be aged out.
Address Valid format is hh:hh:hh:hh:hh:hh.
Port Configures the member port for the multicast address.
Click Apply to take effect the settings.
Apply
Command
97
Description
This command displays the current
static/dynamic multicast address entries.
This command displays the current
static/dynamic multicast address entries with
a specific VLAN.
This command changes the node to configure
node.
This command configures a static multicast
entry.
This command removes a static multicast
entry from the address table.