Cli Configuration - Tripp Lite NGI-M08C4POE8-2 Owner's Manual

6.2.1.2.1 CLI Configuration

Node Command
enable show igmp-snooping
enable configure terminal
configure interface IFNAME
interface igmp-immediate-leave
interface no igmp-immediate-
leave
interface igmp-group-limit
VALUE
interface no igmp-group-limit
interface igmp-querier-mode
(auto|fixed|edge)
configure interface range
gigabitethernet1/0/POR
TLISTS
if-range igmp-immediate-leave
if-range no igmp-immediate-
leave
if-range igmp-group-limit
VALUE
if-range no igmp-group-limit
if-range igmp-querier-mode
(auto|fixed|edge)
Description
This command displays the current IGMP
snooping configurations.
This command changes the node to configure
node.
This command enters the interface configure node.
This command enables the IGMP Snooping
immediate leave function for the specific port.
This command disables the IGMP Snooping
immediate leave function for the specific port.
This command configures the maximum groups
for the specific port.
This command configures the default value for the
limitation of the maximum groups for the specific
port.
This command specifies whether or not and under
what conditions the port(s) is (are) IGMP query
port(s). The Switch forwards IGMP join or leave
packets to an IGMP query port, treating the port as
being connected to an IGMP multicast router (or
server). You must enable IGMP snooping as well.
(Default: auto)
This command enters the if-range configure node.
This command enables the IGMP Snooping
immediate leave function for the specific ports.
This command disables the IGMP Snooping
immediate leave function for the specific ports.
This command configures the maximum groups
for the specific port.
This command configures the default value for the
limitation of the maximum groups for the specific
port.
This command specifies whether or not and under
what conditions the ports is (are) IGMP query
port(s). The Switch forwards IGMP join or leave
packets to an IGMP query port, treating the port as
being connected to an IGMP multicast router (or
server). You must enable IGMP snooping as well.
(Default: auto)
77