Tripp Lite NGI-M08C4POE8-2 Owner's Manual page 281

Parameter
Traffic Monitor Settings
State
Port
State
Packet Type
Packet Rate
Recover State
Recovery Time
Quarantine Times
Apply
Refresh
Manual Recovery
Apply
Description
Globally enables / disables the traffic monitor function.
The port range which you want to configure.
Enables / disables the traffic monitor function on these ports.
Specify the packet type which you want to monitor.
Specify the packet rate which you want to monitor.
Enables / disables the recovery function for the traffic monitor
function on these ports.
Configures the recovery time for the traffic monitor function on
these ports. (Range: 1 – 60 minutes)
Configures the quarantine times for the traffic monitor on these
ports. (Range: 1 – 20 times)
Click Apply to take effect the settings.
Click Refresh to begin configuring this screen afresh.
Select Unblock to enable these ports blocked by traffic monitor.
Click Apply to take effect the settings.
281