Tripp Lite NGI-M08C4POE8-2 Owner's Manual page 310

9.5.2 Web Configurations
Parameter Description
Select IP type for the server's IP.
Enter the Syslog server IP address.
Server IP
Select Enable to activate switch sent log message to Syslog server when any
new log message occurred.
Facility Selects the facility level.
Click Apply to take effect the settings.
Apply
Click Refresh to begin configuring this screen afresh.
Refresh
Select Alert/Critical/Error/Warning/Notice/Information to choose which
Log Level
log message to want to see.
Clear Click Clear to clear all of log message.
Save Click Save to save all of log message into NV-RAM.
310