9.7 User Account
The Switch allows users to create up to 6 user account. The user name and the password should
be the combination of the digit or the alphabet. The last admin user account cannot be deleted.
Users should input a valid user account to login the CLI or web management.
User Authority
The Switch supports two types of the user account, admin and normal. The default user's account
is username(admin) / password(admin).
admin
-
normal
-
The Switch also supports backdoor user account. In case of that user forgot their user name or
password, the Switch can generate a backdoor account with the system's MAC. Users can use
the new user account to enter the Switch and then create a new user account.
Default Settings
Maximum user account
Maximum user name length
Maximum password length
Default user account for privileged mode
Notices:
The Switch allows users to create up to 6 user account.
The user name and the password should be the combination of the digit or the
alphabet.
The last admin user account cannot be deleted.
The maximum length of the username and password is 32 characters.
9.7.1 CLI Configurations
Node
Command
enable
show user account
enable
show dot1x username
configure
add user
USERNAME
PASSWORD
(normal|admin|dot1x)
configure
delete user
USERNAME
configure
dot1x username
USERNAME
PASSWORD
configure
no dot1x username
USERNAME
read / write.
read only.
; Cannot enter the privileged mode in CLI.
; Cannot apply any configurations in web.
This command displays the current user accounts.
This command displays the dot1x user accounts.
This command adds a new user account with choice
of privileges normal/admin/dot1x.
This command deletes a present user account.
This command creates a user account for DOT1X
local authentication.
This command removed a user account for DOT1X
local authentication.
313
: 6.
: 32.
: 32.
: admin / admin.
Description