Global Configuration; Cli Configuration - Tripp Lite NGI-M08C4POE8-2 Owner's Manual

If a PADI or PADR packet is sent from a PPPoE client but received on a trusted port, the

Switch forwards it to other trusted port(s).
Note: The Switch will drop all PPPoE discovery packets if you enable the PPPoE
intermediate agent and there are no trusted ports.
The trusted ports can keep/replace/strip vendor-tag of PADO and PADS packet.

 Keep: means that the PPPoE agent will keep original vendor-tag in the PADO/PADS
packet.
 Replace: means that the PPPoE agent will replace the vendor-tag in the PADO/PADS
packet with its own vendor-tag.
 Strip: means that the PPPoE agent will strip the vendor-tag in the PADO/PADS packet
(Default).
Untrusted ports are connected to subscribers.
If a PADI, PADR, or PADT packet is sent from a PPPoE client and received on an untrusted

port, the Switch adds a vendor-specific tag to the packet and then forwards it to the trusted
port(s).
The Switch discards PADO and PADS packets which are sent from a PPPoE server but

received on an untrusted port.

6.13.1 Global Configuration

6.13.1.1 CLI Configuration

Node
enable show pppoe intermediate-agent
configuration
enable configure terminal
configure pppoe intermediate-agent
<enable|disable>
configure pppoe intermediate-agent
format-type user-defined <user-
defined-string>
configure pppoe intermediate-agent vlan
VLANLISTS
configure pppoe intermediate-agent circuit-
id-vlan VLANLISTS
configure pppoe intermediate-agent
remote-id-vlan VLANLISTS
configure no pppoe intermediate-agent
Command
190
Description
This command displays the current
configurations for the PPPoE IA.
This command changes the node to
configure node.
This command disables / enables the PPPoE
IA on the switch.
This command configures the user defined
circuit ID string for the PPPoE IA.
This command enablesthe PPPoE
IAoneither(a)aspecificVLAN,(b)acomma
separatedlistlike"x,y,"or (c)arangelike "x-y".
This command enablesthe PPPoE IAcircuit-
idoneither (a)aspecificVLAN, (b)a
commaseparatedlist like"x,y,"or (c)arange
like"x-y".
This command enables thePPPoE IAremote-
idoneither (a)aspecificVLAN, (b)a
commaseparatedlist like"x,y,"or (c)arange
like"x-y".
This no command removes the user defined