Web Configuration - Tripp Lite NGI-M08C4POE8-2 Owner's Manual

6.2.1.1.2 Web Configuration

Parameter
IGMP Snooping Settings
IGMP Snooping State
Report Suppression
State
IGMP Snooping
VLAN State
Unknown Multicast
Packets
Apply
Refresh
IGMP Snooping Status
IGMP Snooping State
Report Suppression
State
Description
Select Enable to activate IGMP Snooping to forward group
multicast traffic only to ports that are members of that group. Select
Disable to deactivate the feature.
Select Enable/Disable to activate/deactivate IGMP report
suppression function.
Select Add and enter VLANs upon which the Switch is to perform
IGMP snooping. The valid range of VLAN IDs is between 1 and
4094. Use a comma (,) or hyphen (-) to specify more than one
VLANs. Select Delete and enter VLANs on which to have the
Switch not perform IGMP snooping.
Specify the action to perform when the Switch receives an unknown
multicast frame. Select Drop to discard the frame(s). Select
Flooding to send the frame(s) to all ports.
Click Apply to take effect the settings.
Click Refresh to begin configuring this screen afresh.
This field displays whether IGMP snooping is globally enabled
or disabled.
This field displays whether IGMP report suppression is globally
enabled or disabled.
75