Important Safety Instructions SAVE THESE INSTRUCTIONS! This manual contains important instructions and warnings that should be followed during the installation, operation and storage of this Tripp Lite product. Failure to heed these warnings may affect your warranty. PDU/Switch Location Warnings •...
Page 3
Important Safety Instructions Avertissement concernant l’emplacement de la PDU/du commutateur • Le commutateur fournit des prises multiples pratiques, mais elle ne FOURNIT PAS de protection contre les surtensions ou les bruits de ligne pour l’équipement connecté. • Le commutateur est conçue pour être utilisée à l’intérieur uniquement, dans un environnement contrôlé, à...
Product Features Front Panel: Rear Panel: Gigabit Ethernet Ports: These 24 twisted-pair RJ-45 ports support auto-negotiable 10/100/1000 Mbps and auto MDI/MDIX cross-over detection functions for true “plug and play” capability. Note: Not compatible with PoE (Power Over Ethernet) applications. Power ON/OFF LED: An LED illuminates to indicate that the switch is receiving power. Port Status LEDs: These 24 green LEDs illuminate to indicate the link speed.
Quick Installation 1U Rackmount Installation Mount the switch using either the four cage nuts , washers and screws provided or four user-supplied rackmount screws . The user must determine the fitness of the rackmount screws to hold the unit in the rack before installation. Connect the switch to a properly grounded outlet.
Warranty & Product Registration 2-Year Limited Warranty TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of two (2) years from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products.