Web Configuration - Tripp Lite NGI-M08C4POE8-2 Owner's Manual

Sfp slots managed industrial ethernet poe+ switch
Table of Contents

Advertisement

Success!
L2SWITCH(config-if)#management host 192.168.203.13
Success!
L2SWITCH(config-if)#show
DHCP Server port(s): 1-6
Eth0
DHCP client: Enable
DHCPv6 client: Disable
Management vlan: 1
Management Host: 192.168.202.1/24, 192.168.203.12/32, 192.168.203.13/32
Default gateway: 192.168.202.1
Link encap:Ethernet HWaddr 00:0B:04:90:60:21
inet addr:192.168.202.74 Bcast:192.168.202.255 Mask:255.255.255.0
inet6 addr: fe80::20b:4ff:fe90:6021/64 Scope:Link
UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500
Metric:1 ASYMMTU:0
RX packets:17931 errors:0 dropped:6680 overruns:0 frame:0
TX packets:6500 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:3565872 (3.4 Mb) TX bytes:1173040 (1.1 Mb)

5.1.4.2. Web Configuration

Parameter
Description
Management Host Settings
Management Host
This field configures the management host.
This field configures the subnet, so that any host in that subnet can
Subnet Mask
control the switch.
Apply
Click Apply to take effect the settings.
Refresh
Click Refresh to begin configuring this screen afresh.
Management Host List
43

Advertisement

Table of Contents
loading

Table of Contents