Web Configurations - Tripp Lite NGI-M08C4POE8-2 Owner's Manual

6.15.4.1.2 Web Configurations

Parameter Description
STP Global Settings
Select Enabled to use Spanning Tree Protocol (STP) or Rapid
State Spanning Tree Protocol (RSTP) or Multiple Spanning Tree Protocol
(MSTP).
Selects the Spanning Tree running mode.
STP - Spanning Tree Protocol.
Mode
RSTP - Rapid Spanning Tree Protocol.
MSTP - Multiple Spanning Tree Protocol.
Configuration Parameters
Region Name Configures the region name for the Switch.
Revision Configures the revision for the Switch.
Instance Selects an instance which you want to configure.
Configures the priority for the instance.
Priority is used in determining the root switch, root port and
Priority
designated port. The switch with the highest priority (lowest numeric
value) becomes the STP root switch. If all switches have the same
priority, the switch with the lowest MAC address will then become
217