Table of Contents
Advertisement
allows you to validate an unlimited number of users from a central
location.
Guest VLAN
Configure the guest vlan.
Primary Radius
When RADIUS is selected as the 802.1x authentication method, the
Server
Primary Radius Server will be used for all authentication attempts.
Enter the IP address of an external RADIUS server in dotted decimal
IP Address
notation.
UDP Port
The default port of a RADIUS server for authentication is 1812.
Specify a password (up to 32 alphanumeric characters) as the key to be
shared between the external RADIUS server and the Switch. This key is
Share Key
not sent over the network. This key must be the same on the external
RADIUS server and the Switch.
Second Radius
This is the backup server used only when the Primary Radius Server is
Server
down.
Apply
Click Apply to take effect the settings.
Refresh
Click Refresh to begin configuring this screen afresh.
259
Advertisement
Table of Contents
