Tripp Lite NGI-M08C4POE8-2 Owner's Manual page 41

Parameter Description
Current Time and Date
Current Time This field displays the time you open / refresh this menu.
Current Date This field displays the date you open / refresh this menu.
Time and Date Setting
Select this option if you want to enter the system date and time
Manual
manually.
Enter the new date in year, month and day format and time in hour,
New Time minute and second format. The new date and time then appear in the
Current Date and Current Time fields after you click Apply.
Enable
Select this option to use Network Time Protocol (NTP) for the time
Network Time
service.
Protocol
Select a pre-designated time server or type the IP address or type the
NTP Server domain name of your timeserver. The Switch searches for the
timeserver for up to 60 seconds.
Select the time difference between UTC (Universal Time Coordinated,
Time Zone formerly known as GMT, Greenwich Mean Time) and your time zone
from the drop-down list box.
Daylight Saving Settings
Select Enable if you want to use Daylight Saving Time. Otherwise,
State
select Disable to turn it off.
Configure the day and time when Daylight Saving Time starts if you
enabled Daylight Saving Time. The time is displayed in the 24 hour
format. Here are a couple of examples:
Daylight Saving Time starts in most parts of the United States on the
second Sunday of March. Each time zone in the United States starts
using Daylight Saving Time at 2 A.M. local time. So in the United
States you would select Second, Sunday, March and 2:00.
Start Date
Daylight Saving Time starts in the European Union on the last Sunday
of March. All of the time zones in the European Union start using
Daylight Saving Time at the same moment (1 A.M. GMT or UTC). So
in the European Union you would select Last, Sunday, March and the
last field depends on your time zone. In Germany for instance, you
would select 2:00 because Germany's time zone is one hour ahead of
GMT or UTC (GMT+1).
Configure the day and time when Daylight Saving Time ends if you
enabled Daylight Saving Time. The time field uses the 24 hour format.
Here are a couple of examples:
End Date
Daylight Saving Time ends in the United States on the last Sunday of
October. Each time zone in the United States stops using Daylight
Saving Time at 2 A.M. local time. So in the United States you would
41